Key points for maintenance and repair of Skin Packaging Machine

Release time:

2018-05-30 22:22

Source:

With the improvement of people's living standards, products packaged in close fitting can be seen everywhere on supermarket shelves and have fully integrated into our daily lives. This is also thanks to the contribution of the body mounted packaging machine (SMT), which has brought us more convenience in our lives. This type of machine has been widely used in factories in China. Today, the information editor of Fengyuan Packaging will take you to understand the tips for maintaining and repairing body mounted packaging machines, so that this machine can better serve the vast number of Chinese factories.

Firstly, after purchasing the machine, it should be installed in a clean and ventilated workshop. If the machine is transported through logistics, due to transportation bumps, the fixing screws of the machine components may become loose, and some parts may even be shaken off (with a very low probability of occurrence). It is necessary to tighten all the screws again and reinstall the missing parts.

Secondly, pay attention to the voltage requirements of the machine and do not connect the wrong voltage. And pay attention to the power of the machine, whether the wires are thick enough, and whether they can carry the current required by the machine. Otherwise, there may be a safety hazard of electric wires being burnt out.

Thirdly, pay attention to whether the motor of the machine has forward and reverse rotation. Is there a phase sequence protection device installed on our machine. If this device is not installed, it is necessary to pay attention to the wiring of the three-phase wires to ensure that the motor rotates forward.

Fourthly, because the machine has an electric heating box, no debris should be placed on the electric heating box, otherwise there may be a fire hazard.

Fifthly, if a constant heating body mounted packaging machine, also known as a direct heating or constant temperature type, is used, the continuous constant temperature heating of the electromechanical hot box has a significant impact on the workshop environment. If conditions permit, an exhaust and exhaust device can be installed on the electric box to reduce the impact on the temperature of the working environment and make workers work more comfortable.

Sixth, the vacuum system of this machine is a crucial part. Pay attention to cleaning the vacuum chamber and keep it clean. Do not let iron filings and other debris enter the vacuum system, otherwise the service life of the vacuum pump will be greatly shortened.

Seventh, the transmission part of the machine should be regularly lubricated.

Eighth, this machine adopts two types of vacuum pumps, rotary vane refueling vacuum pump and refueling free vacuum pump. Refueling vacuum pumps require regular inspection of the oil level and timely addition. No refueling vacuum pump, if the carbon brush is worn, it needs to be replaced.

The body mounted packaging machine (SMT) that serves a large number of Chinese factories also requires our careful care in order to better serve SMT packaging. If you need further information, please contact the senior sales consultant of Fengyuan Packaging: Manager Tang, phone number: 13509839987, corporate business QQ: 2850670788

Dongguan Zhongtang Fengyuan Packaging Products Factory (started in 1997 and was the drafting unit for the body mounted packaging part of the "Packaging Machinery Selection Guide" by the Machinery Industry Press)

Chaodong Road, Chajiao Industrial Zone, Zhongtang Town, Dongguan City, Guangdong Province

Tel: 0769-88128321, 88128391 Fax: 0769-88128381

Fengyuan Body Fit Packaging Film Website: www.skinpack-cn.com

Fengyuan Body Fit Packaging Machine Website: www.tietibaozhuang.com

220V390Skin Packaging Machine-The Gospel of Warehouse Shops

None

220V390Skin Packaging Machine-The Gospel of Warehouse Shops

None